By Jennifer Dubose
CMMC Is Coming: What It Means for Your Shop, Your Costs, and Your Customers, Ep #42
Podcast: Play in new window | Download
CMMC is no longer something manufacturers can afford to ignore.
If you’re doing work in the defense supply chain—or even thinking about it—this is quickly becoming a requirement, not a “nice to have.” And what makes it challenging is that it’s not just about passing an audit. It’s about how your entire business handles data, systems, and security.
In this episode of Buy the Numbers, we break down what CMMC actually means for manufacturers in practical terms. What does it require? What does it cost? And how do you even begin to approach something that touches everything from your ERP to who can access your building?
We walk through the full scope of compliance—from documentation and system requirements to concepts like FedRAMP, POAMs, and shared responsibility across your vendor network. We also dig into the financial side, including how to think about ROI, the real cost and timeline, and why this could become a barrier to entry for some shops.
If you’re unsure whether CMMC applies to you—or how serious you need to take it yet—this episode will give you a clear, practical starting point.
You will want to hear this episode if you are interested in…
- (0:00) CMMC requirements and what manufacturers need to know
- (3:30) Why compliance is becoming a real financial consideration
- (8:52) The process of CMMC: systems, documentation, and process changes
- (16:51) A discussion about FedRAMP compliance
- (19:35) User access, building control, and security considerations
- (22:57) Get a free report of sales opportunities in your area at FacturMFG.com/chips
- (24:01) Get advice from a Registered Practitioner Organizations (RPOs)
- (25:01) How ProShop helps you reach CMMC compliance
- (31:26) The real cost of compliance and how to think about ROI
- (33:51) POAM: Plan of Actions and Milestones
- (35:40) CMMC compliance may be a barrier to entry for some shops—but not all
- (41:47) The vendors you use must also protect CUI
- (45:40) Grow your top and bottom line with CLA
- (46:51) Cost and timeline for CMMC compliance
- (50:04) Do your due diligence on any consultant you may use
- (51:40) Ask your supplier for a “Shared Responsibility Matrix”
- (54:46) Why we love SMW Autoblok for workholding
- (55:30) Who is currently FedRamp compliant?
- (59:41) The opportunities that will be available if you’re CMMC compliant
- (1:04:31) Does the math make sense for your shop to become compliant?
- (1:09:10) Assess your readiness and build systems around it
Resources & People Mentioned
- CMMC Acronym Cheat Sheet for Manufacturers
- NIST SP 800-0171 Document
- Get a free report of sales opportunities in your area at FacturMFG.com/chips
- Grow your top and bottom line with CLA
- Why we love SMW Autoblok for workholding
- Ask your supplier for a “Shared Responsibility Matrix“
- GroundControl
- HighQA
Read the Full Episode Transcript
[0:00] Probably 15 years ago, so University of Tulsa, which is where I went to school and we’re in Tulsa, they have a tremendous cybersecurity program. It’s a top-ranked nationally. Like half the students that go out of there like go work for three initial government agencies that are not allowed to tell anybody where they went, you know, when to work, that kind of stuff. They, you know, they produce a lot of IP coming out of the school, but then some of that they look to monetize and take, make, you know, a company out of. But there was one and I was in the investor pitch for it and it was some piece of hardware device that they install in existing like printers, copiers, fax machine type things. Especially like the big all-in-one units that blocks hacking. Because at that time, again, this was probably 15 years ago, maybe longer. One of the biggest losses of data to hackers, they’re coming in through the fax line into the all-in-one printer copier fax and just pulling everything off the hard drive in that because those things store everything it’s ever scanned. Right.
[1:17] So they’re, you know, hackers are getting into that because nobody, nobody protected their fax line. Sure. Right. It was, they didn’t need to. Right. An analog line coming into your fax machine. Yeah. That’s one of the biggest data leaks for, yeah. Well, I can see why it would be something that needs to be on the list. Welcome to Buy the Numbers. Each week, we’ll explore the numbers that drive your business from accounting and finance to operations and the exciting realm of mergers and acquisitions. Whether you’re a seasoned veteran or just starting out, our discussions will equip you with the insights and strategies you need to rein in the power of data to elevate your manufacturing company. Let’s crunch some numbers. Hello, Paul. What’s up, Mike? How you doing? I’m doing great. Cause we’re in Fort Lauderdale, Florida at the MFG show. And it’s been an awesome conference. Amazing speakers, obviously beautiful location. And we’re going to golf today. Yeah. The location, the weather. Yeah. Golf is going to be fun. That’s going to probably be the highlight of any trip for me anyway. So. I’m, I think it will not be my highlight because I don’t know how to golf and I’m going to force myself, but I’m, when you explained how scrambles work, I was much relieved. Everyone’s not going to be waiting for me to like fish it out of the rough or swimming in the, in the water features to get my ball out.
[2:43] And you’ve never played golf on a golf course. I know we’ve been to a top golf. We’ve done some top golf, but no, I’ve never played golf on a golf course. Yeah. I hope you fall in love with it. Cause I, I really think you will actually love it. Cause you love being outdoors and all that. And that’s what I, I mean, that’s probably one of the things I love most about it is just being out in this beautiful, it’s like you’re walking through a garden all day, you know what I mean? Like it’s usually looking forward to it. Well, the conference has been great and the theme yesterday for sure. Well, I’d say there were two themes and this was true. One of these was true last week at the industrial marketing summit. Everybody’s talking about AI. Of course. I don’t know about you, but I’ve been really impressed with what I’ve seen people doing with AI in the last couple of weeks. I’ve learned a ton. Yeah. I mean, I showed you some of the, one of the projects I started working on after learning some stuff last week. And we, I built an agent for the friction framework. Yes. Yeah. We built that friction framework that, uh, that was good. But the other big theme here yesterday was all about the defense industrial base. Right. So major topic. Yeah. And we heard from, um, uh, Veronica and Brennan that have worked in government and are now outside, but trying to solve like supply chain issues. Yeah. And then we heard from Blue Forge Alliance. Dan Bagley. Dan Bagley.
[4:02] What was the, the Northeastern defense industrial based Institute or something like that. And I mean, I think they did a real good job yesterday of explaining the problem. I think everybody knows exists, which is that we have a problem. The numbers don’t add up. Right. To the demand getting better. Yes. And anyway, you know, you and I have talked for years about, you know, like, I mean, I, I have a somewhat of an allergic reaction to, you know, the aerospace and defense work for a lot of reasons. But the reality is, is, I mean, we are doing some defense work now at Hill and come November. I need to be CMMC compliant, which is obviously one of the big hurdles to fill the defense industrial base up with the suppliers they need. Exactly. Yeah. The, the dib as we can just call it, the defense industrial base needs to be growing, but in reality it’s been shrinking in the last decade. There’s more businesses getting out of it, partly because they’re just retiring and closing their businesses, which is this whole silver tsunami issue that we’ve been kind of battling the whole save a shop concept. You know, how do we keep these shops from going out of business? And that’s because it’s just a shame to see any shop go out of business. More specifically to this topic, there is so much demand, unfortunately, right now for defense articles and defense work. There isn’t nearly the bandwidth in the base to support all the machining that needs to be done. So, and a shop cannot continue to work in the dib unless they get their CMMC certification, assuming we’re talking about level two, assuming they are working with CUI, right? Drawings, 3D CAD models, technical data.
[5:43] Remind me again what CUI stands for? It stands for controlled unclassified information. Okay. So it’s information that’s deemed important enough that we don’t want bad actors like China to steal it and then reverse engineer all of our designs and come out with an airplane that looks almost identical to the F-35, which they’ve done, but it’s not all the way top secret. And it’s, you know, the requirements to protect this data have been in contracts in the dib since 2017. But it was all under a self-attestation model where shops were supposed to have been protecting it, but most of them didn’t, or actually almost none of them did it. And that was proved out, you know, years ago with a bunch of audits that the DOD did or what have you. And they realized, holy cow, no one is actually protecting this. And it’s the supply chain that’s been the ones that have been hacked the most. And all this data is exfiltrated. Easier to hack John’s machine shop in Iowa than the Department of War. Exactly. Right? So yeah, so go where the information is anyway and piece it back together. Yeah. So the CMMC program then was put in place not to add any new requirements, just to enforce with a third party audit the requirements that have been in place for almost 10 years. Right.
[6:58] To put some scope on the problem too. One of the numbers they gave yesterday that I guess surprised me, but didn’t, they were talking about to build a submarine. There’s, was it over 4,000? 4,000 different suppliers. Right. So just for submarines, there’s 4,000 of us out there that need this compliance. And that’s just for whichever submarine he was talking about. Yes. Yeah. So it’s a big problem. It’s massive. You know, again, I’ll go ahead and I’ll get on my soapbox for a second. You know, you mentioned people are leaving the space. I mean, yes, some because shops are disappearing, but others are choosing not to do the work. And we’ve been in that latter category for quite some period of time. And there’s, you know, there’s hurdles that we talked about with the speakers briefly yesterday, and they brought up when it comes to payment terms and commitments and, you know, the investment it takes to do the work, but then maybe, you know, all of a sudden. No guarantees. No guarantees on volumes. You know, now here’s another hurdle, right? So you’ve got all these hurdles to do the work. Obviously, it’s good work. It’s, you know, I think the companies that, I mean, some of the best shops I’ve been in are killing it in aerospace and defense, right? For sure. So there’s, it’s obvious that the work is there and it’s good work and you can build a really strong shop on it.
[8:23] You just, this is just one of those other hurdles though you have to get over. So that said, that’s why I asked you to record this episode with me because I know you’re deep into getting ProShop ready for CMMC. And now I’m, you know, looking down the barrel of needing to do that myself. So I’m just for my own, I mean, I know there’s going to be a ton more information and things I have to do after this conversation. I’m not going to just magically be ready. But can you guide me and the listeners kind of through what do I, what am I going to need to look like come mid-November or whenever that date is to be, it’s level two, right? Yes, almost certainly. Very, very few small shops that would need level three and level one is only for companies that hold technical data, but not CUI. So they might have information on, you know, contract numbers and dates and things like that. That is somewhat sensitive, but not nearly to the level of technical data that could be exfiltrated to reverse engineer something. So maybe to put it in context and we’ll do, we can just use Hill as an example and I can, I can give you yeses and nos as we talk through some of it. But I mean, you’ve been in my shop many times, you know, my IT infrastructure pretty darn well. I don’t know that I look that much different probably from that perspective and probably readiness than a lot of shops around the country probably.
[9:51] Right. So we can, as we go through this, I’ll just, I’ll ask questions as it relates to us. Cause again, I think we’re probably not all that unique in where we stand today. Yeah. I think you’re real, real typical for a lot of shops out there. Yeah. So, so what, what do I start looking at? I mean, like, what are the, I mean, this mostly has to do with IT stuff, right? To some degree. I mean, yes, the, the control of CUI is largely an IT issue. Although more broadly, it really is a, is a shift in the way the entire organization operates to have a compliance mindset of how do we keep all this data safe and secure. So probably not even that much different from like if, if a shop has gotten ISO or AS certified, where you kind of have to shift the culture to a QMS mindset, right? Like everything relates to that. Very relatable. Yeah. Very similar. So, and I’m sure a lot of people looking at CMMC probably already have one of those certifications. So they probably know what you’re saying when you say like just a cultural shift, mindset shift. Yep. So what, I guess from there though, I mean, like I really know nothing. I mean, I don’t know what I need to change.
[11:06] Sure. Sure. Well, I’ll preface all of what I’m going to say with, I’m not an expert in this myself. I’m still learning every day, trying to learn as much as I can. Jacob Horn’s not here. That is too bad. Yeah. He could, he would be. We met with him at the MFG show last year. That’s right. But he’s not at this one. One of the first things you need to wrap your head around is what are the actual requirements? And the requirements are listed in largely in the NIST 800-171 document. And getting that document, getting it would be a first step. And for level two, there are 110 controls that a third-party auditor or also known as a C3PAO, third-party assessment organization. That’s a Star Wars character. Yeah. They named it after, they named it after the little robot guy. So yeah, third-party assessment organization. Okay. They will audit you on those 110 controls. So you need to just understand where you’re at on those. So starting to go through them, you know, line by line, point by point and understand all the requirements is the first thing you need to do. It’s very likely that you, do you work with a third-party IT company? Yes. MSP? Okay.
[12:22] So talking to your MSP is probably another very early step you want to do. And there’s a reasonable chance that they will not know what CMMC is, which is a good indication that they’re probably not your IT provider in the future. Well, and it’s funny you say that. So gosh, six years ago, probably I brought this up to them and he was like, what are you talking about? And I talked to him earlier this year. And he is wrapping up two other clients now as level two certificates. So awesome. So good for him. Because I had actually told him six years ago, I was like, well, I think this is going to be a thing. So you might want to look into it. And tip him off. Yeah. It’s like, if you could locally be somebody that does that, I think that will be helpful. And a lot of, tons of his clients are in manufacturing, which is kind of what led to the discussion early on. But I think that’s a great point, right? I mean, you probably don’t want an IT supplier that you don’t want to be their guinea pig on this, probably. Right. Someone that’s been through it. So I think a traditional outsourced firm, right, is an MSP, a managed service provider. From what I’ve heard, the firms that are more in aligned with what CMMC needs is an MSSP, a managed system security provider.
[13:44] Oh, okay. Or something like that. Yeah, they are doing all their IT work with a direct, with a main focus compliance of cybersecurity, not just keeping your computers running. Right. Okay. So that will be an important part of it. And then of course, there are things that are directly related to, you know, your IT network. But it’s not all just that, you know, there’s, there’s a bunch of controls around your employees. I guess some of it sort of blends into IT related stuff, like how do you, how do people access your facility? Do you have key cards, you know, do you have cameras so you can, you know, monitor your, your facility and make sure someone isn’t walking in the back door that can just, you know, grab a computer and steal something or, or throw a thumb drive in there and put a virus on your network that’s going to exfiltrate a bunch of data. Right. So there’s those things. But a lot of it really does just come down to putting a sort of a scope around the boundary of the CUI that you have in your company, right. Or that you handle. There’s a real big difference between storing CUI on your local network and versus storing CUI in the cloud. Okay. And the way that ProShop would become a real important factor in this is because you’re a cloud customer of ours. Sure. You use ProShop to, and are ProShop safe product to store all sorts of files that is, that are CUI or potentially CUI.
[15:16] Right. Okay. So would that, and that’s, would I, would my entire system transition over that or would it just be. This is one of the big questions that needs to really be figured out. And I’ve, you know, heard lots of different opinions and this is an area where I’m still just very much learning. Right. Sure. You know, in full candor. So if you can reduce the, the boundary of where that CUI store is stored, you reduce the cost and complexity of your compliance. Okay. And so imagine, I think hopefully we can, you know, we can figure out a way both through our, you know, our features and functions as well as the configuration of devices on your network where we can get as close to as possible. A zero CUI on premise environment. Where everything is stored in the cloud. Now for a shop that is storing CUI in the cloud, that cloud service provider, a CSP is the acronym. There’s so many acronyms. And so you would be actually considered an OSC, an organization seeking certification. Okay. So just, you’ll hear that. But for you, for any CSP to store data on their cloud, they need to be FedRAMP, moderate, equivalent, or have an ATO. It’s called a authority to operate by the federal government. Okay.
[16:40] So let me stop you there. So, you know, I’ve heard CMMC. I hear the FedRAMP. I know you guys are, you guys have been, ProShop’s been talking about FedRAMP quite a bit lately. What is, is FedRAMP? FedRAMP isn’t something I’ll do, but it’s something that I need to, solutions I’m using need to be FedRAMP. Correct. Yeah. Shop cannot get, or does not need to get FedRAMP. Right. But in order for you to… The software I’m using should be FedRAMP, what, certified or patched? That’ll be one of the things the auditors ask you. Okay. When they come and do the audit, they will say, are you using any cloud software? Yes. Okay. Are all the cloud service providers you’re using, do they have FedRAMP? Moderate equivalency or better? Assuming they’re storing CUI. Right, right, right. So, you know, like a toolpath, for example, I don’t know exactly what Al’s plan is for that. But if you’re uploading 3D CAD models into toolpath that will be used for, you know, defense articles, that would be considered CUI. And so toolpath would have to be FedRAMP for you to continue using it. And if you were using toolpath and they’re not, you’d probably just have to be able to show that you don’t use toolpath for CUI items. Yeah. They’re isolated from that software or whatever.
[17:57] Yeah. You can put that into your SSP, your system security plan. Okay. And your procedures to say that, you know, just as policy, you do not upload things that are CUI. Do you know, have you looked at all into how that relates to even like Fusion 360? That, you know, I mean, a lot of shops. Yeah. Fusion, it’s been a debate for even a long, for quite a long time now. Fusion doesn’t even offer a GovCloud offering. Okay. So like historically, you shouldn’t use Fusion for ITAR related work, which has a Venn diagram for ITAR and CMMC is almost 100%. Oh, right. I mean, I assume that’s the case. I can’t imagine anything that is ITAR that would not fall under CMMC. You know, there are different regulations with different requirements, but. But if something is ITAR, it’s safe to assume you’re going to need CMMC. Yeah. I mean, I haven’t heard of something that relates to a machine shop that would be ITAR, like a drawing or a CAD model that would not be considered CUI. So message out there to everybody, if you’re doing any ITAR work, you need to keep listening to this episode. Yeah, it’s relevant. So, yeah, I’m not sure what people that are using Fusion are going to do because you can’t practically use it in offline mode or there’s something about that, but I don’t think. Yeah, I don’t, I don’t know the details.
[19:22] I just know people talk about that as it relates to ITAR. So they probably need to switch their CAM software to something that is either on premise entirely or, you know, bedramp, which I haven’t heard of one that is. So you mentioned user access or like, you know, so even down to like building control and stuff, right? That’s interesting. And it actually now makes me kind of appreciate my MSP maybe a bit more than I did because as we’ve upgraded a lot of our IT over the last five years, we’ll say. When we’ve been getting into, you know, what routers and all that that we’re using inside, which we’ve now standardized across all our locations and all that. I do remember even there he was like, well, we’re going to go with this brand and this level inside that brand because when you’re ready to add building access control and, you know, we’ve already looped our cameras into the same system, all that. Okay. So this can get down all the way to the infrastructure level. Oh, absolutely. And there are devices that will be outlawed that are like made in China or have Chinese chips or whatever that the auditors or this, you know, whoever says you may not use this type of hardware. And it even gets, when we were at CUICON a few, like a month ago down in Florida, even your printers, like if you have a printer, that’s a smart printer that has hard drives or, you know, that is something you need to control and you may not be able to use printers, certain printers. You know, that’s, and this is a total side, this is a rabbit trail, but that’s such an interesting example.
[21:04] I hadn’t even thought of, but probably 15 years ago. So University of Tulsa, which is where I went to school and we’re in Tulsa, they have a tremendous cybersecurity program. It’s, it’s a top ranked nationally. Like half the students that go out of there, like go work for three initial government agencies that are not allowed to tell anybody where they weren’t, you know, went to work. They, you know, they produce a lot of IP coming out of the school, but then some of that, they, they, they look to monetize and take, make, you know, a company out of, but there was one and I was, I was in the investor pitch for it. And it was, it was some piece of hardware device that they install in existing like printers, copiers, fax machine type things. Especially like the big all-in-one units that blocks hacking. Because at that time, again, this was probably 15 years ago, maybe longer. One of the biggest losses of, of data to hackers. They’re, they’re coming in through the fax line into the all-in-one printer copier fax and just pulling everything off the hard drive in that, because those things store everything it’s ever scanned. Right. So they’re, you know, hackers are getting into that because nobody, nobody protected their fax line.
[22:28] Sure. Right. It was, didn’t need to. Right. An analog line coming into your fax machine. Yeah. That’s one of the biggest data leaks for, yeah. Well, I can see why it would be something that needs to be on the list. Like I said, rabbit trail, but that’s reinforces why it’s so intrusive maybe to, to get through the CMMC or it feels intrusive. Yeah. I mean, you really have to analyze all the technical hardware and software in your whole company, really. In manufacturing, growth isn’t accidental. It’s engineered, but a lot of suppliers are still building their pipeline on outdated lists, inconsistent follow-up and hope-based marketing, hoping their website will somehow bring in leads. Gabe Draper, the founder of Factor knows that struggle. Years ago, he ran a shop that went bankrupt, not because of quality, but because he didn’t have a steady way to generate new opportunities. That experience is what led him to build Factor. Factor helps suppliers create consistent sales opportunities by combining targeted outreach with marketing that puts you in front of the right buyers. Their team finds the right companies, starts real conversations and sets qualified meetings. So if your pipeline swings with referrals or seasonality, Factor brings a system that puts you back in control. And for listeners of this show, Factor is offering a free custom report that highlights the best opportunities in your industry, plus a list of real companies that match what you do. Request yours at factormfg.com slash chips.
[23:57] That’s F-A-C-T-U-R M-F-G dot com slash chips. So, you know, very few companies have the expertise to even fully understand the entire NIST requirements. And so what a lot of companies do is they engage with a firm, a consultant firm often called RPOs or registered practitioner organizations that employ RPs, registered practitioners that are, you know, have studied and are experts in CM&C. There’s other certifications well beyond that as well, but that’s sort of a baseline level. So, you know, depending on how much your local MSP guy knows about it, you’ll very likely need to augment. Sort of the advice you’re getting with an RPO. And it is worth noting that companies that there are companies that do consulting for CM&C readiness and that also are C3 PAOs to do auditors auditing as well. But the same company can’t do both for your company. They can’t audit their own work. They can’t. Yeah, they can’t consult and then audit. So they can do one or the other. So if you were to look, though, like, I mean, at the like, so the top, say, five things that, again, someone like Hill, I mean, just the typical shop out there is going to have to focus on. So, I mean, I’m hearing obviously our IT infrastructure, you know, so the actual computers on the floor and in the shop or in the office. And if I’m running some sort of server, all that type of stuff, probably more Wi-Fi, all that.
[25:28] Right. In our case, you know, we’re we’re on ProShop and it’s. I mean, it’s central to everything we do. All of our information stored there. So our ERP system. Some maybe some of our CAD cam or ancillary systems. So there’s say three of the top five. I’m guessing that have the biggest impact. What are a couple other things maybe that were that I’m not thinking? I mean, like, well, even just to, I guess, access control. I mean, I wasn’t thinking about that, but, you know, beyond like what we already do for ITAR. Yeah. What else are you seeing people faced with like the big items? I mentioned briefly the SSP, the system security plan. That really is the document that outlines sort of all of your policies and procedures around anything related to the NIST requirements. And so a lot of compliance is not just the hardware and the software stuff, but it is the policies and procedures that you put in place that everyone needs to be trained on. You know, you need to have practical solutions for two-factor authentication to log into any system. This whole concept of least privilege that people cannot view or access things that they don’t have privilege to do. Now, is that like, so in ProShop, for example, if we have a client or a job that we say it’s ITAR compliant or ITAR, I don’t remember what the checkbox says, but, you know, then only people that are approved for ITAR have access to that print and all that stuff. Is that a similar type thing there? It is similar.
[27:12] It goes well beyond that. So there’s a few things that we’ve been building over the last several years. So ProShop, directly or indirectly, will help you, help support you in meeting compliance on something close to 80 of those 110 controls. Oh, wow. So a lot of them, depending on the configuration of, you know, your whole system, we could either, you know, completely help you meet that requirement or partially meet that requirement. Okay. Right. Like two-factor authentication would be a good example. Sure. Right. We use Yubikeys, which is a FIPS compliant method of two-factor authentication. There’s lots of methods that aren’t FIPS compliant that you wouldn’t pass the audit with. But let’s say you stored 100% of your CUI in ProShop and nothing on your local network. I’m not saying this is possible, but if that was the case, then our two-factor authentication would be the only method you need. You wouldn’t also need it on Windows or your local computers or SharePoint or, you know, whatever. So, you know, there’s those things that have to be practically thought about. As it relates to specific functionality, you might be familiar with the classifications module in ProShop. Oh, yeah.
[28:28] So that module was built recently with CMMC in mind. And as you ingest files from your customers, you can tag them with different classification tags, including CUI or MCI or ITAR. That whole system, you then sort of pair the markings that go with those files and then soon to be all the records in ProShop as well that are not file attachments, but the actual records in the database and the system directly with your users about which users are allowed to see. CUI or whatever classification markings. So you can put people in groups that have access or not have access to these types of things. And then addition to that, there’s also because that will just block access even within the browser. Like, so if they go to a page that has an image that’s already been previously, you know, attached there, which is directly looking at an image in the file store, you know, ProShop safe. If they don’t have access to see CUI and that is a CUI image, they won’t even see it in the browser. So it’s passing that authentication and permissions right through all of that. And then, of course, you can also limit what we call the file access security groups who can go browse your network and actually directly access files. And one thing that is unique that I think will play an important factor in minimizing the scope of where CUI is stored is our somewhat unique ability to allow your users to log into ProShop, which maps the drive. And then allows them to set their working directory.
[30:11] Let’s say you’re using like Mastercam or something that’s that’s a local CAD system, CAD cam system to set their working directory in the ProShop safe cloud drive as opposed to working on your on a local shared drive or their own local C drive. OK, and then do all their work. In that cloud drive saying saving their temp files there, you know, that requires configuration of the hardware, which your IT team or MSP would have to help you with. And you’d have to basically probably through policy and also through, you know, direct configuration of your hardware to preclude any saving on that local hard drive, even of temp files and things of that nature. But the fact that our architecture of safe allows that direct mapping and then browsing and working out of that drive is a pretty fundamental difference than most ERPs, which allow you to upload a file. But if you want to transact on that file, you have to redownload it to that local network, to that local computer and work on that computer, which now means that computer is in scope and you have to have encrypted and two factor just to even get onto that thing. And so the IT costs just balloon for every device on your network. So that’s a factor. Yeah, that’s and it’s not as far as CUI is related.
[31:32] It’s not just storing. There’s three aspects of it. It’s storing and it’s processing and it’s transmitting CUI. If it does any of those three, then that device is in scope. OK, so the real trick and this is the part that I still am learning and nailing down myself is. Is it possible to get a shop floor computer or any computer in your network, for that matter, to to be able to view CUI on it like a drawing, but not have it be transmitting or processing CUI? And I’ve heard people that say no, and I’ve heard people that say yes. So it’s like just a monitor basically to the data. Now, you can do that with VDI, like virtual desktop, but the heart of the cost for virtual desktop is can really add up. Right. I mean, I was talking to someone recently that’s like you’re talking, you know, 30 grand plus in licensing costs just to just to have a VDI set up. And then the hardware itself is probably, you know, you know, if you have a server running this, it’s probably, you know, a 30 grand server. Yeah. And it just stacks up right there. Yeah, that would be good. And then the firewall. I don’t know what kind of firewall you have in your company, but a good compliant firewall can be 15 grand in itself. Yeah. So yeah, it it’s vastly complex.
[32:53] Right. And which is why I’m not an expert in it yet. So the remind me the name of the document you said again, SSP? SSP. Yeah. What was it? System security plan. System security plan. So that’s your QMS. In a sense. Yeah. It’s the written documentation behind your system and your process. It probably even is. I mean, like how QMS is built on ISO or AS standards. And it’s like, here’s how we do this in section 2.3-A or whatever. This would be similar. You got these 110 compliance things and you’re going to address every one of those and how you’re handling it in your SSP. Yeah. And the auditors should go line by line through all those controls. And you have to show to them, you know, your policy, your procedures, and your objective evidence that you meet those requirements. And they’re going to look for actual evidence, you know, show us the logs, show us the data, show us the systems that are actually controlling all this. And then the other document, which we haven’t talked about yet, is a POAM, a plan of actions and milestones. That is sort of the plan of executing your SSP is how I understand it. I’m sure there’ll be people listening. They’ll be like, no, no, that’s totally wrong. But that would include like if you have any items that need to be improved, like you’re not there yet as you do like a mock assessment.
[34:18] Or when you start understanding those 110 controls, there’s a system and I will not get the acronym right, but it’s you get your SPRS score or SPRS score. And this is something that each DIB contractor would ultimately need to submit into this government website. And I don’t remember the words that make up SPRS, but basically, if you don’t meet 110 controls, you need that plan of actions and milestones to get yourself to that 100% compliant state. So it’s your, I mean, I’m going to keep putting this back to like our quality manual because I think that’s relatable for most of the listeners. So it’s your, it might be your opportunities for improvement and minors or something that, and here’s how we’re fixing them. And then we have to respond to those and say, Hey, this is our plan to fix them. And then they get looked at again next year. Yeah. Similar type. I think that’s a pretty, yeah, pretty, pretty reasonable way to outline it. Again, here I am. I’m looking, I’m staring down the barrel of this. Who all on my team am I going to have to get involved in this? I mean, is this something that like, just at the leadership level, plus an outside provider or two, I’m going to be able to handle to get the plan in place. I mean, obviously there’s gonna be a lot of training and all that type of stuff, but what have you seen with, you know, some of, some of your, you know, friends and peers and customers that like, how, how much work is this for the average shop to implement and do? For the average shop, it’s a massive amount because they have never had a compliance mindset in the past. So they have, you know, a completely ad hoc network.
[36:02] You know, a lot of the hardware probably is not compliant. They certainly don’t have policies and procedures in place. They don’t even think about where drawings are, where models are. They’re scattered everywhere on their network. Reining all that in, you know, can be an absolutely massive undertaking. There likely is going to be, you know, a need for someone in your company to champion this. Sometimes they throw it on the quality manager, the QMS, you know, QMS coordinator, but, but, or it could be an IT person. If you have one in house, yeah, you’ll need to, you’ll need to have at least one person sort of leading the charge and, you know, and coordinating with your, your MSP and, and an RPO or whatever consulting, you know, that you get for it to make sure you’re putting all the controls in place. But it will ultimately include all employees for training, but you’re not going to have most of your machinists working on this a ton. Right. They just need to be told this is how we’re doing this. This is how we’re doing it. This is what we need to know is the training. So, and that’s fair. I mean, I, I probably didn’t ask that question fairly, even your average shop. I mean, I guess your average shop doesn’t, so, so let me flip that around and say, okay, for a shop like Hill that has a pro shop and we have an IT. You know, we, we have, we haven’t just like, we didn’t necessarily just run down to Best Buy and get a $99 wifi module or, you know, like we, there is some infrastructure in place. It’s, it’s been thoughtful when we make those investments.
[37:38] We have a pro shop. We’ve got, you know, all the, you know, we, I mean, we have good infrastructure. What, what does that hurdle look like? It may be quite a bit less. I mean, you’ll need to verify that all your hardware meets the requirements. You might need to upgrade a few things here and there. The fact that you’re already largely storing most things in pro shop is, is a benefit. There’s less work to do to understand where every, every piece of CUI is in your, in your whole company without digging into the nuances. I mean, as I don’t know, a way to be relatable. Maybe it may be, maybe you’re already, you know, half of the way there in some of the work that a shop has never even thought about this at all. We’ll need to start, you know, it’s hard to say. Sure, sure, sure. Well, I mean, one thing I’m hearing and I, and I, you know, I don’t think either one of us intend this to be a pro shop commercial, but I mean, is this even feasible to do if you don’t have, I mean, it’s feasible, I’m sure. But is it realistic to get done if you don’t have pro shop or an equivalent in your shop already that has the fed ramp? And I mean, you’re talking about a complete overhaul if you don’t have that, right? Well, I guess there’s a, there’s a big bifurcation point. If you don’t have any cloud software that holds CUI, then you’re going to just be entirely on premise with that data and you have to really lock down everything within your company. I mean, I guess if you don’t have any systems, like if, I mean, and we’ve all been in the shop that it doesn’t have anything, they don’t even have a computer maybe in the building, then you’re actually, it’s probably not a huge hurdle.
[39:16] Well, I’d say it’s actually possibly even a bigger. Oh, is it? Okay. Yeah. Because to, to. I was going to say, you just need a couple of shredders and you’re good. If it was only that simple. Yeah. I mean, you’d have to then lock down everything on your network. You still have to define the boundaries of what, where your CUI is, which could possibly include every single computer, but then the ongoing compliance monitoring and the logs of who’s accessed what. Cause like weekly, weekly monitoring of logs and reviewing of logs is a requirement standard. So you would probably need a full-time person just doing internal, you know, doing, doing all that work, patching software on every computer in your whole network. Um, you know, keeping all the encryption and the, and the two factor authentication and just all the systems in place. And, you know, the hardware itself is going to be an expensive bit of hardware, right? These, uh, these, you know, boxes with a camera built into it. So if anyone logs in, they can take a picture of who’d logged in and, you know, you have multiple, multiple VMs within that box with backup and redundancy. And, you know, it, it adds up in a hurry.
[40:33] And then, uh, if you have CUI printed all over the place, you have to have all your policies for that stuff. Oh, you just need shredders. Yeah. And who, who can, uh, who can access it when, you know, during non-business hours and during business hours and, and all this stuff. So I think the, uh, I think this will really push and it might be the final push you need to like stop printing drawings. Right. Um, and just make sure there’s nothing that’s been printed. There’s no paper that would be CUI. So we already, I mean, like in that and kind of maybe relates back to the question I asked earlier about ITAR. You know, as we’ve recently become ITAR, maybe six months ago now. That’s, that’s one of the things that we, you know, we said internally is like, okay, if it’s an ITAR job, you don’t, you’re not allowed to print the print. So yeah, I can see, I mean, and, and we’ve got through those jobs fine without doing it. It’s just, like I told you, it’s still everybody’s past fires to print that print. Yeah. But yeah. So that, yeah, that makes sense. I mean, that, that, that would, that could be that final, like, okay, we’re just not printing, printing because I can’t rely. I mean, I don’t want to rely on somebody noticing if it’s sure compliant, you know, it’s, you can’t. Right. So another thing I want to throw out there as it relates to prints and files and everything is, is if you have the, the clauses, the FARS clauses and the NIST clauses that, that CMMC would apply to you. That means it also applies to any vendor that you pass down.
[42:06] I was gonna, I was gonna ask that earlier. So, okay. So now you’re not responsible for your plating companies own CMMC journey, but you do need to ask them, do they have policies and procedures in place to protect CUI? And, and this, this definitely comes into an area where I, I am for sure not an expert. Like, yeah, I don’t know if an auditor would say you can’t work with any companies that are not CMMC themselves. Cause that’s going to probably be a non-starter. Cause there’s a lot of grinding houses, heat treating houses, you know, plating houses, painting, welding, whatever that, uh, that aren’t CMMC. I have recently learned there’s this paper loophole that if you don’t email them or send them any digital data and you only print a file, you know, print something and send it to them. And they, in their policies, they will not scan it or upload it into any, into any network that that can pass. Okay. Right. If they only have it on paper, it stays with the job. It gets shredded at the end or it comes back to you and that’s fully managed the whole time. And I’m sure, I mean, I know we’ve had, we have a handful of customers over the years that, you know, when they bring an RFQ, like they call and say, Hey, are you guys there? I’m bringing you over an RFQ package. Right. You know, they bring over the prints.
[43:26] Sure. And then when we’re done bidding, we give the prints back. So I’m sure a lot of people have experienced that. So it’s probably, I mean, just kind of a similar. But that’s hard if you’re not local to, you know, if you’re shipping, if you’re shipping intrastate, like how do you do that? So do you FedEx them something that they quote to? And how secure is that? And sure. So this is where like an RPO would, would be a much better advisor. You know, the, the thing we’ve done again, as, as recently ITAR and recently picking up some defense work. When we talk about like outside processing, if something needed plating or painting or heat treating or whatever, what we’ve done to this point is we’ve just said, if it requires anything. That’s just a no bid for us. Like if it requires any outside processing, we’re just right now. We’re not going to take that on. Oh, or just quote it without the process. Right. Yeah. We’ll just say here it is minus plating, you know, or something like that. You’d sure we’ll let, we’ll let you, Mr. Customer deal with managing that part of the process, but that’s just because, you know, we’re just getting ourselves up to speed. And we’re like, I was just like, I don’t want to tackle that. I don’t want to have to worry about what am I supposed to black out on a print or, you know, whatever until we learned more. But I guess even that as a policy could probably answer some of those questions on the 110 things. Like, well, we just don’t do that. Sure.
[44:48] Like we don’t outsource it. We don’t. And then the, then the, it’ll come down to, you know, with the work you’re chasing, the customers you want to win, will they, will they find that acceptable? Right. Many of them will not want to take on the plating and the outside processing. So yeah, there’s the, of the jobs we’ve done, they just actually didn’t even require it. And then there was a, there was another ITAR job we bid that was going to have like two outside processes. And it was just like, ah, let’s just skip this one, you know, like, so we just chose not to bid it. But, um, I think we did actually get, I think actually I’m, the jobs we’ve done, there are a couple of them that we just, we did. We just told them, it’s like, Hey, we’re bidding this minus plating. And they said, that’s fine. We have our plater we like. And so it didn’t matter in that case, but I mean, I could see in some cases it would. Manufacturers, what is your biggest headache? Is it measuring, improving profitability? Gaining efficiencies with AI automation? Tightening up your cybersecurity? Getting your business ready to sell? There’s so many things. At CLA, their goal is to know you and help you with challenges like these and more. Every day, CLA helps manufacturers tap into millions in revenue and cost savings.
[46:08] Imagine cutting scrap by 75% and saving millions or boosting capacity and revenues by up to 20%. Picture achieving four and a half million in accelerated tax deductions, doubling your business’s sales price, or slashing order intake time by 75% with automation. And how about increasing inventory turns by 50% with key operational changes? All of these are real CLA success stories with one thing in common, a deep understanding of the client’s business. So what’s your biggest challenge and how can CLA help you? Visit claconnect.com to learn more about how you can grow your top and bottom line. We’ve talked a little bit about the resources it’s going to take internally. Let’s talk briefly what you’ve seen out there with cost and time. Depends on where you’re starting. Yeah, yeah. It depends on a lot. But you know where Hill’s starting. What am I looking at? I mean, I hear a lot. I hear the sort of $100,000 number thrown around a lot. The assessments, depending on the complexity of your organization, vary quite a bit. But if it’s a single site, you know, not multi-entity organization. I think a $30,000 number is what I’ve heard that many times for the assessors to come and do the assessment.
[47:26] And that’s to the Star Wars character? Yes, that’s the C3PAO. That’s what they would charge. And then there’s all the cost in getting ready to pass the audit. You know, there’s… So you got a $30,000 audit. Yep. And then from there, the cost is, again, if I’ve already got the right routers and servers and all that. If you happen to have already, yeah, you could possibly save $20,000 or $30,000. If I don’t have that. Then there’s all that cost. And then there’s all the cost, just your internal cost of putting in the SSP, doing all the training, building the policies. And there are companies that, you know, will help you get ready for that. And some of them provide what are called enclave solutions, where basically everything is now stored in this enclave that you don’t have any CUI that’s outside of it. So in some ways that can simplify the process, but they’re going to charge you, you know, quite a bit for that system. Sure, sure, sure. So there’s the upfront costs and then there’s the ongoing costs every year for just to maintain compliance. You know, ProShop is working towards our FedRAMP moderate equivalency and we’re on target for the middle of this year for having it. So it should be safe for you to, if you’re doing your audit in November, you should be safe as far as ProShop is concerned. Right.
[48:43] You know, it’s storing CUI in our system. So you need to do the same thing with any other CSP that you have data with as well. Then the timeline you asked about. So I’m hearing anything from like three months queue time with a C3PO all the way up to more than a year. So it is pretty important to, you know, start engaging with some, see what kind of lead times they’re dealing with and sort of get yourself in line. Yeah, I mean, we’re sitting here mid-March right now and the deadline’s in November. Right, nine months or eight months away. So yeah, it’s time. Yeah. Yeah. So, so in some ways I almost need to get that scheduled for September and work and, and then work on work towards it. I haven’t, I haven’t asked a C3PO directly, like what does a shop do if they’re not even remotely ready yet, but they want to get in line? Like, can they do that? Can they schedule an audit for October with you? Right. And, and then they start working with their RPOs and their MSPs and trying to get ready. Some of them might do that and others. Yeah, it’s probably a good, it’s probably a good phone call to make. Yeah. Right. Just call one of them up and say, Hey, this is where I’m at.
[49:58] And I’m going to, I’m going to give it the effort to be ready. Can we get on the schedule? And I just want to throw out one thing, you know, as it relates to consultants, RPOs or the, or the like, you know, as CMMC has come out, there have been a lot of firms that have jumped into the, into the fray, you know, consultant firms. And there’s a lot of them that are probably not, they’re there to, they’re there to make money. They’re there to, you know, throw out a big number and, and sort of lean into the fear aspect of what’s going to happen if you don’t get it. So I think it’s prudent to really do your due diligence on any consultants that you might use, you know, what’s their reputation, talk to former or current customers. You know, talk to some of the C3 POs, if they know a reputation of a firm. Cause I’ve heard too many stories, unfortunately, where, where a company spent tens of thousands of dollars with somebody that said, yeah, yeah, we’ll get you ready. We’ll get you, you know, like CMMC in a box. And if they claim it’s, they’re just going to do it all for you and it’ll be easy for you. That is a big red flag. Yeah. So you cannot outsource this. Yeah. So maybe, you know, listeners, if, if you’re this far into this and maybe you’ve already gone through part of the process, you know, if you saw LinkedIn posts promoting this episode or whatever, maybe get on there. And if you’ve had a good experience or a bad experience, say, Hey, you know, use these guys or we went this way and it’s not going well or, you know, whatever.
[51:27] Cause yeah, I can see how that, I mean, like anything, I mean, people love, there are people that love to make money and, and we’ll do whatever they need to do to make it right. So make promises they can’t deliver on. Sure. So, so to wrap up it’s Thursday after it’s, it’s Thursday right now. We’re playing golf later. I’m traveling for the weekend after this, this is a priority for me. What are, what are the first three things I should do Monday? You should probably reach out to your MSP and just really start to understand, you know, the work that they’ve been doing for your company over the last couple of years. Probably start researching, you know, a good RPO. Download that NIST 800-171 standard and start getting familiar with it. And maybe even just pencil check mark. Oh, I think I’m good here. Like identify your own, even maybe you don’t understand them all, but. Yeah. And there are softwares out there that they basically help you walk through the assessment and score yourself. Is there a list? I mean, so again, without being a Pro Shop commercial, but I am on Pro Shop and you mentioned that roughly 80 of those will be covered through Pro Shop. Is there a list of those 80 anywhere? Yeah. So that’s a great question. There is common document called a shared responsibility matrix. Okay. And so we are developing as we go, as we prepare for our FedRAMP equivalency, we are preparing our shared responsibility matrix. And it shows which controls are inherited, like with AWS, like that we use ultimately in a FedRAMP boundary within Pro Shop, you know, itself.
[53:03] And which one flows down all the way to you and your company. So if I’m using Pro Shop, I can start with that document. You could. Yeah, that’d be great. And I’m sure maybe some of the other systems that someone might be using, they could check with them. They certainly should. Shared responsibility matrix. Yes. Yeah. So if they’re using some FedRAMP, I guess really if you’re using anything that’s like FedRAMP qualified. They certainly will have that. Then they need to ask, you need to ask that supplier or vendor, whatever you want to call them for that document. Yes. Okay. And if they can’t provide that, or if they say, oh, you’re good, you’re in our GovCloud offering, that’s also a big red flag. Okay. You know, and I, I have not heard of another ERP designed for your scale of shop and your industry that is FedRAMP. Or has said that they’re working towards it with a target date. That’s soon. Yeah. Just like being in GovCloud, that is not sufficient. And if they say, yeah, you’re, you should be good. That’s a red flag again. Because ultimately it is the, it is the shop’s responsibility to meet all those 110 controls. And if you don’t understand the control well enough and you tell the auditor, oh yeah, we use, you know, XYZ ERP and their GovCloud. That’s not. You will not pass.
[54:27] Right. Yeah. And I believe with once you go for your actual audit there, you either pass with full 110 score or you fail and you have to get back at the end of the line for an audit again. Oh gosh. There’s no remediation period. Which could be another six months to a year. Yeah. Yeah. Fellas. Hey, well, I got you both real quick. So I’m really trying to drill in like our workholding options at Hill and all of our shops. Any advice? Mike, it’s as simple as RASRAM. As what? RASRAM. You’ve never heard of it? I have not. All? What Nick is referring to is the seven habits of highly effective workholding. That makes more sense. Repeatability, accessibility, scalability, reliability, adaptability, and modularity. If you want to find all of these principles in one catalog, check out the SMW Autoblock catalog. You can find it at smwautoblockblok.com. Thanks, fellas. This is probably a terrible question because neither one of us are going to be able to answer it. But the only, I feel like the only, I mean, you know, I’m sure most of us see and hear a lot of the same stuff from the pro shops of the world.
[55:46] You know, kind of all the software companies that are out there serving our industry. I feel like, am I correct in saying the only two I’ve really heard talking about FedRAMP is ProShop and Paperless Parts? Paperless Parts is already. They’re already FedRAMP, right? They were ahead of the curve last year and they got that last year. Is there, is there anybody I’m missing as it relates to some of the stuff that a lot of us are using or looking at or. Not that I have heard. Not that you’ve seen. Yeah. The only, the only ERP related solutions that I’ve heard of are some of the big systems that will put the software in a, like with a third party organization. To manage it for them or something. That has their own, that puts it in their own FedRAMP cloud, but the software itself is not FedRAMP. And, and I’ve heard that that can work. And I’ve also heard that more recently that that’s not sufficient. Like the software itself has to be FedRAMP. Like if the, if the software company still has access to, to that, that, that software, you know, that’s running your data. If they have access to it and they’re not FedRAMP, that’s a, that’s a security problem. And so. And as far as we know, like on the CAD CAM side, nobody’s currently doing anything. Not cloud that I’ve ever heard.
[57:06] So that would have to be entirely on them. And then I’m just trying to think of other types of systems. You know, we use machine monitoring, but that probably doesn’t matter. Right. You’d have to verify with your, your provider if they pass anything that would be considered CUI to their cloud for doing analysis. Cause I, I, yeah, I wouldn’t think in our case, anything is. Cause it’s just, we’re just getting reports on where the machine ran well or not. It’s not, but I don’t, I mean, I don’t know. You do have to be sure because if they’re ingesting G-code for analyzing data there, that could be considered CUI. I’ve heard arguments both sides. G-code is absolutely CUI. And I’ve heard G-code is not CUI. It’s probably the safe bet to assume that it is. Yeah. So your, your monitoring system may, may not be compliant. I’m trying to think of what else in the tech stack that. Balloon drawings. We do the balloon drawings. Yeah. Yep. So, um, your, that’s for sure. Your balloon drawing provider would have to be FedRAMP. Yeah. Unless it was entirely on-prem. Right. Um, or yeah. And I only, in that space, I only know, I mean, there might be others, but I only know of ground control and IQA. There’s many others, but yeah, they would have to be entirely on-prem. Do you know if any, have you seen or heard any of them? I know that ground control is pursuing their FedRAMP. Okay.
[58:26] Yeah. So there’s a lot to think about. So much. There’s a lot to think about. So much. It’s kind of scary now. Like, like I said, you know, just staring down the barrel of it needing to be ready in November. I, I do truly, when I get back from traveling Monday, need to sit down and do this. Or at least get a plan. I can’t wait till this summer when I have more time. Cause I won’t. Yeah. Yeah. There’s still lots of, uh, CMMC deniers out there that it’s like, they’re kind of still got their head in the sand. And like, it’s just, it’s not, you know, maybe they’ll, maybe they’ll push it out. Maybe there’ll be exemptions. It was Jacob Horn that said exemptions only come at like a major program level. And so it’s not like my, it’s not like Joe’s machine shop will get an exemption. They can only come from a very limited number of people and they just generally do not offer exemptions. So this isn’t going to be like a lot of things that happen in the government. Like, I mean, right now we’re in the middle of, uh, we haven’t approved a continuing resolution. The government shut down, but they’re not right. It’s not going to be one of those things where it’s like, oh yeah, just push it off. We’ll know we’ll vote again in November. You know, it’s, this is real. It was very real. You know? So for the flip side of it, like, you know, so, I mean, this would be my wrap up commentary on this.
[59:41] I guess is one. It’s real. It’s critically important. If you want to stay in the defense space, sure. Now look at it from a opportunity standpoint. There’s going to be a lot of people not ready. Probably most, most will not be ready. And if you are, you’re selling quite a huge advantage. Yeah. You’re going to be now, instead of being another shop that can bid this job, you might be the only shop that can bid this job for that, for your customer. Sure. Yeah. I mean, depending on your actual capabilities for size and materials and geometry, you can make this, this, yeah, the number of options that primes and, and, you know, the government will have is, will be much more limited than it is today. And, you know, we’re, and we’re living in a, in a current time in the world where there’s two major conflicts going on in the world right now, along with all the other conflicts that are always going on. Sure. So obviously, I mean, demand for, for Department of Defense type work is high right now. It is. We have an administration that’s, you know, committed to building that infrastructure that, you know, building up military infrastructure. So, um, yeah, I mean, it’s, it, we look at it as like this, oh shit thing. Like I got to do this compliance thing and it’s going to cost me a hundred thousand dollars and it’s going to be this annoying thing I have to do. But I mean, I think if you just kind of turn that on its head and go, wait a second though, if I do spend that hundred thousand dollars and I’m ready in November and 80% of the rest of the shops in the country are not.
[1:01:18] Yeah. I’ve, I mean, I’m writing my own ticket almost. Right. I think the opportunity is, is massive for companies that are assertive and really go after it. Ready to go. Yeah. Yeah. So I, I mean, I guess I would, that would probably be my thing is to like, and just encourage people to say, like, if this is the work you want, and again, that could be a whole nother podcast and I have my feelings. Um, but if, you know, if you want to be a defense industrial based supplier, you need to jump all over this because you’re, you know, the, your competitors are getting ready to rule themselves out of the conversation. You know, and yes, uh, you know, that being said, there are, I’m, I’ve been pleasantly surprised on how many shops in the, within the last six months probably really have started to tackle this, you know, and are getting some steam and some movement on it. So, you know, it’s not too late to jump in with both feet right now and try to be ready by November or shortly after. Yeah. Do you have, have you heard any speculation of like, of the, you know, there’s what, 18,000 job shops in the United States or whatever. And I mean, like, it’d be interesting to know, like how many of them currently are doing work that would be CMMC. Oh, I’ve no, I’ve heard how many contractors there are.
[1:02:39] Thousands. Oh, many, many thousands. Yeah. And I think there’s, as of, as of, you know, mid-March 2026, there’s, I’ve heard there’s like three or 400 companies that have their CMMC certification. Right. So there’s, there’s at least several thousand right now that are not, that are not, and there’s probably, say there’s still 3000 that aren’t. Oh, it’s many more than that. There’s tens of thousands because it’s not, it’s not all just machine shops. And I’m just thinking of the machine shop world though, like for our listeners though, like let’s say there’s 5,000 that are currently doing work that will be regulated by this. And there’s only three or 400 that are compliant. So that’s still leaving, let’s just say there’s 4,000 that still need to be. Sure. You have any guess on how many of them will be ready come November? I mean, is it 50%, 10%, 90%? Yeah. I mean, you could probably do the math. Part of the limiting factor is how many C3 PAOs there are. Right. There has not been nearly enough. Right. And there’s a lot more coming online all the, all the time. Sure. So if you did the, the rough, the rough order magnitude calculations of how many assessors there are and how many companies they can possibly assess in a X number of month period.
[1:03:56] I still got to believe there probably won’t be more than a thousand shops. So they’re 80%, 70% are still going to not be ready or, or will never be ready. They’ll just decide to get out of the business if there’s only, if they only do 10 or 20% defense work anyway. Yeah. And that’s, I mean, so, you know, again, basing this kind of on Hill, I mean, that’s, that’s what I’m looking at. And I’m saying, okay, is this where it’s, it’s a very small portion of what we do currently, you know, is, is it, you know, this is where I need to, you know, so by the numbers show, right? Like we can close with like, how does this relate to numbers? I mean, you got to do the math, right? You got to say, okay. With the, so with the level of work I do today, the answer would be no, there’d be no reason for me to invest a hundred thousand dollars in becoming compliant to, to just do the work I’m currently doing. Sure. It’s just not. It doesn’t pass a lot. I would lose money on that one job or that, that one equation, but then, then I have to flip it around and say, but how much work will I be able to do? If I am knowing that a lot of people, there’s going to be a lot of people that are not ready. And if I am, is that, does that now result in millions of dollars in revenue? Well, now all of a sudden I can’t afford that hundred thousand dollar investment and the time it’s going to take and the culture change and the mindset change and all that type of stuff.
[1:05:21] And that’s, that’s where I like math because the math will tell me if I need to do it or not. Yeah. Yeah. I’m not going to do it to save one job. That’s a hundred thousand dollars a year worth of work. Of course. Right. But if it opens the door to millions. Yeah. And I think that’s a reasonable assessment that if you have dozens of CNC machines. That there is potentially, you know, millions of dollars in long-term work in the next many years, that would be open to you if you had your CMC. Yeah. Well, that’s a great place to wrap it up, Paul. Thank you. I know you, you know, you said I’m not an expert on this. I don’t know why I’m talking about it, but the, um, but you’re as close to an expert on it. I know from a real practical standpoint, cause you’re out there dealing with it every day and you’re dealing with shops are dealing with it every day and you guys are going through FedRAMP. And yeah. So from a, from a good practical advice for shop owners, I think you were perfect. Yeah. Hopefully it was useful. And, uh, if the real call to action is to, to learn more and engage with true experts. Yeah. We’re, we’re here to also be a resource if we, if we can be, and we have people on our team that are definitely more expert than me. We have some RPs within our organization and some, some true experts as well. Well, you know, we started the show and normally I have a guest introduce themselves and all that, but I think, you know, everybody already knows you. The, uh, but for those that are wondering just real quickly, how, how to get in touch with you, if they do have some questions about anything you said.
[1:06:46] Yeah. I mean, LinkedIn is a great way to reach me. I’m a active there obviously. I think there might be one other in a totally unrelated industry. So find the one with ProShop. Yeah. With, and not that you don’t already follow him, but, and, uh, the last name V A N space M E T R E not, not E R. And I’m pretty, I try to be as responsive as I can to, to direct messages there. Yeah. And then just, you know, ProShop ERP.com. And we do have a few pages about, uh, about CMMC and we have a CMMC sort of starter guide that people can download. Okay, good. Well, um, let’s make sure we linked that in the show notes. Sure. That would be good. And then of course you’re also my cohost on making chips. So you can reach out to through making chips. Yep. And then if all else fails, reach out to me and I will send you a cell phone number and you can just call him. So Paul, again, thank you. Yeah. Thanks Mike. It’s an important topic. And we need to be talking about it more and more. And I, uh, yeah, I hope for the sake of the DIB and our national security posture that you do lean into this and you do decide that you’re, you’re going to go for it and not, you know, be on the sidelines. Yeah, I think it makes sense for us. I it’s, you know, and the other thing I would say, even in that regard, I mean, it’s a lot of money and it’s a lot of time and there’s a lot of opportunity there. I think there’s also something about, it’s also just a good way to run your business. Oh yeah.
[1:08:15] And maybe that’s another great wrap up as well. Today it is the DIB, it’s the Department of Defense. Although I heard at Kuicon that all departments in the U.S. government will be adopting CMMC. And I, and I think that’ll then filter out to all our other industries. Yeah. All major industries. Once there is a standard in place, like the aerospace industry is going to say, well, yeah, we want that too. And then the oil and gas industry and the automotive industry and the medical industry, they’re going to, you know, 10 years from now, I bet there’s going to be some version of CMMC. It might be called something different. Yeah. That we’re all going to have to live up to. And quite frankly, we probably should. I mean, we all know like cyber attack and cybersecurity is a massive problem worldwide. So just protect your company if nothing else. Yeah. Yeah. Even if we didn’t, I mean, what I would see. So here’s, here’s my practical takeaway. So, and maybe others are in this boat, same boat. I’m going to look at these 110 things in the NIST, whatever you said, 800, 171. I’m going to assess our readiness, including looking at your matrix and anybody else’s matrix of what I’ve got ready and what I can have ready.
[1:09:32] Right. With a quick pull of the trigger. And at the very least, I’m going to start building my systems around being ready. Yeah. Right. Yep. Whether I go through a $30,000 audit or not, whether I turn on this feature in ProShop for, you know, like whatever, that’ll depend on when I’m ready to pull the trigger. Sure. Right. But I still should have the right infrastructure. I should still, you know, start building my mindset and my culture around the company, around, you know, security and compliance. So at the very least, you know, we talk a lot about like, if you’re building a shop, do you, you know, like, I mean, how many times have you been asked the question? I know I’ve been asked it plenty and I’m not even in your space. Oh, am I too small for an ERP system? Right. My take is no, you start with that on day one. So you’re just building it right from the beginning. Same thing here, right? Like, let’s just go ahead and build it. Right. So when I am ready, I’m ready. Yeah. And even if you never pursue CMMC and your customers don’t ever mandate it, like there’s so many very fundamental controls that just make sense to put in place to improve your posture. Sure. You know, turning on two-factor authentication for everything you log into. Right. Setting your minimum password complexity requirements.
[1:10:51] Right. Yeah. Just those things alone can just practically help a company from getting, from getting hacked and having ransom, you know. I was going to say, I mean, I have a buddy whose company is in the manufacturing space sometime last year, I’ll say in the last six months. I mean, they had, they had a $50,000 ransomware thing done and they ended up having to pay it. Right. You know, and, and with some of these simple steps. Could have avoided that. Could have avoided it. Yeah. Well, again, thank you. People reach out to me, reach out to Paul, whatever. Well, you know, happy to point you in the right direction on stuff and thanks for listening and we’ll talk to you next time.
This transcript was auto-generated and may contain errors.
Connect with Paul Van Metre
- ProShop ERP
- ProShop’s CMMC Starter Guide
- Connect with Paul on LinkedIn
Connect With Buy the Numbers
Subscribe to Buy the Numbers
Audio Production and Show Notes by – PODCAST FAST TRACK