By Jennifer Dubose
7. Trust But Verify: How to Stop Your Shop’s Standards From Slipping
Podcast: Play in new window | Download
Every shop has standards. The hard part isn’t writing them down, it’s keeping them from slipping. In this episode Paul Barnes and I get into how standards quietly erode, why that erosion costs a lot more than it looks like on the surface, and what it actually takes to hold the line day after day.
We start with why standards slip in the first place, and for me it almost always comes back to two things: ownership and monitoring. When we hand a process off and never check on it again, we’re really just hoping it gets done the way we pictured it. People aren’t mind readers, so if we haven’t detailed the standard work and reinforced it, everyone fills in the gaps differently. Trust but verify isn’t micromanaging, it’s the follow-up that keeps a standard from drifting.
From there we get into the costs, and most of them are hidden. There’s the production you quietly lose, like the operator I watched inspecting parts while the machine sat idle. There’s customer trust that erodes one inconsistent shipment at a time. There’s cultural drift when you tolerate the wrong behavior, and there’s the leadership bandwidth you burn fixing on the back end what you could have set right up front. Whatever you tolerate becomes the new standard.
We also talk honestly about why leaders delay. Sometimes it’s time, sometimes it’s loyalty or hope that a person will change, sometimes it’s a fear of conflict. Complacency creeps in and you go blind to what’s right in front of you. The line Paul and I keep coming back to is that the standard you’re willing to walk past is the standard you accept, and your team is watching which one you pick.
Then we shift to the tactical side: defining your non-negotiables, using your ERP and work instructions to give people the roadmap, resetting the environment with 5S and visual controls, and building routine audits into every day. We close on preventing future slippage with visible KPIs, weekly reviews, and short check-in cycles, because delayed decisions are expensive and standards rarely fall apart all at once. They erode quietly, and decisive leadership is what protects your culture, your customer trust, and your profitability.
What’s Covered in this Episode
- (0:00) Progress over perfection: eat the elephant one bite at a time instead of waiting for the whole fix
- (2:47) Today’s topic: standards, how they slip, and the cost of letting them slide
- (4:06) Trust but verify: handing off a process without following up is just hoping
- (5:10) SOPs have to paint what good looks like: The turning-job story
- (9:40) You can’t delegate experience: teaching managers to see what you see
- (11:27) The two things that make standards stick: ownership and monitoring
- (13:54) Hire MFG Leaders: recruiting from people who have actually run shops
- (14:23) Stop saying “normally we do this”: killing the gray areas
- (16:13) Lost production, over-processing, and over-inspection
- (18:44) A, B, and C players: hiring and coaching to protect your standards
- (23:17) More hidden costs: customer trust erosion, leadership bandwidth drain, and lost opportunities
- (25:34) Check out the IMTS Job Shops Workshop and Networking Reception
- (26:33) Why leaders delay: time, complacency, conflict avoidance, and leading with facts
- (31:40) Standards are incredibly important—so set non-negotiable standards early
- (34:11) Progress over perfection: don’t wait until everything is perfect to start
- (35:13) Measuring the business: proven rate, machine uptime, and baselines
- (36:33) Check out the Lights Out podcast: automation, robotics, and running machines through the night
- (37:00) The tactical side: non-negotiables, ERP, 5S resets, and routine audits
- (43:05) Preventing future slippage: visible KPIs and weekly reviews
- (46:28) Recap: how standards slip, the hidden costs, and why leaders delay
- (47:17) The standard you walk past is the standard you accept
Resources Mentioned
Read the Full Episode Transcript
[0:00] I’d say one of the things I’m guilty of doing is trying to make everything right. It’s that concept of like, how do you eat an elephant? Like one bite at a time, right? Well, I want to go in and I want to fix the entire problem, everything at once and have everything perfect. Where I struggle is making sure that I stop myself and say, no, we need some progress.
[0:21] One step, one bit of progress. Let’s make this change, make that the standard. Let’s have that fix done.
[0:29] And then we’ll go to step two and step three and step four and making sure that we go all the way across it. Because I’ve also, one of the things I’m guilty of is like, okay, I don’t want to do this until we have the whole thing fixed and guess how long it takes to get the whole thing fixed. Weeks, months, years, maybe never.
[0:48] And then we get distracted and we go do something else because we didn’t have it perfect. And a lot of times we just need to just don’t delay in getting started. Get something started.
[1:04] Welcome to the manufacturing blueprint. This is the show where manufacturing leaders, shop owners, and operators come to sharpen their thinking, strengthen their teams and improve the way work gets done. From leadership and culture to systems, strategy, and execution.
[1:21] We break down the blueprint used to build high performing manufacturing organizations. No fluff, just straight talk and real conversations, real lessons and real results. Here’s your host, Jason Davis.
[1:36] Hello again, and welcome back to the manufacturing blueprint podcast. I’m your host, Jason Davis, and I’m with my good friend today, Paul Barnes. Paul, how you been this week, my friend? I’ve been busy, but it’s good to be back.
[1:50] We’ve had a bit of bad weather, I guess, coming through, you know, we’re being here in North Carolina. We get like a little bit of snow and it just shuts everything down. Over the last couple of weeks, we got a lot of snow and a lot of ice.
[2:01] Kids were out of school for almost two full weeks. So it was totally different, but it was actually a nice little break. Cause we, you know, the whole like sports and extracurricular activities all kind of settled down.
[2:12] So while we were still working, it was like a nice little home time as well. So that was cool. Well, it’s cool.
[2:18] It’s cool season here, but it’s, it still makes me sweat. So it’s not that cool. Yeah.
[2:23] Your cool season is not that cool. I’m still, I’m still in my shorts though. Well, I see, look, you’re wearing your red today.
[2:33] You’re just celebrating the recent term for Maine United and, and, and the, uh, and the great forum they’ve had so far. It’s, it’s not often we’re in good form. So you have to celebrate it when you can.
[2:45] That’s right. I hear you. So, well, listen, today I want to talk about standards, right? So we’ve all talked about standards.
[2:54] We all have standards. We have standards in our personal lives. We have standards in our work.
[2:58] We have standards everywhere, but what happens when those standards start to slip, right? And I want to talk about what do we do to prevent that slippage? What do we do to identify that slippage? What do we do once that slippage starts to happen? Really some of the, the, the cost of the delays that go with that slippage, um, because it’s a, it can be a real impact to your business. So those delayed decisions in my mind, they don’t really just kind of stay neutral. They just start to compound, right? And so what can we do to combat that? What can we do to get ahead of it and stay in front of it to make sure that we’re not having to fight those things.
[3:40] And once we see them, making sure that we make decisions very quickly, because I know I’ve been in those situations where I see a standard slipping, I feel it, but I wait, right, because you have this hope that maybe it’ll get better. You have this hope that it can turn around, but you know, there’s, there, there’s a reason you’re starting to feel that. And that to me is the point where that’s telling you that you got to take some action.
[4:05] And one of the things that I’ve experienced is as a manager, you build your team and you create a standard, you create a process, you create something that wants to happen and you pass that off, but the thing that gets missed so often, and I’m guilty of this a hundred percent, I’m guilty of it, is I expect that person to go do what they’re supposed to do, right, because I don’t want to spend the time to go back and follow them up and look over their shoulder and micromanage them, go do what you’re supposed to do. Now, where I fail in the past is I do need to do, you know, the trust, but verify. I need to make sure that I’m following up on some frequency.
[4:49] But if you just give that task away, give that process away and never check on it and just make the assumption that it’s going to be right and it’s going to be done, maybe it is, maybe it’s not. And I certainly have been in both scenarios. You’re smiling like you know, yeah.
[5:07] I know I’ve been there, but sometimes it’s the, I find sometimes that it’s the being able to actually have that person see the process like you see it. Sometimes we know, and we can see in our head what good looks like, what you want, what you expect. That’s true.
[5:24] People aren’t mind readers and everybody will then visually see something different and different. We might think we communicate it the same way. And I’m going to tell you what I can physically see now, right? I can tell you, I can see a mic, I can see computer screens, I can see, right.
[5:39] But how that’s laid out and how that’s configured will look completely different for me, just instructing someone. And, uh, I think that’s why it’s so important that we actually detail standard work, standard operating procedures, and then spend time training and reinforcing so that you’re actually painting with more clarity what that expectation is. Because people don’t deliberately do a bad job, but at the end of the day, at the end of the day, I think we’re all naturally lazy.
[6:09] And if we can find ways around doing something, doing something shorter or easier, if people think that’s still acceptable, then they’re going to take that choice. They may not fully understand the consequences of not carrying it out or looking the exact same way as what your intention was. Yeah, totally.
[6:27] And I will also say sometimes it’s just an experience, right? Um, I’ve got a perfect example. Just this past week, I was on our floor, we’re running a job and it’s a turning job. And this kid is a younger guy.
[6:41] He was absolutely trying his best running a part. It’s a, a, a hand load operation. So you load it, you flip it and it should take about two minutes.
[6:54] And he was running a part and we had some pretty tight tolerances on it. So he was running a part and then he was taking that part and going to the station right beside him. It’s at, at his station.
[7:05] He, we had the inspection set up. So then he was checking the surface finish. He was checking the diameter and the thickness, and it was pretty tight tolerances.
[7:15] And he was so proud of himself because he was checking every single one and making sure that they were right. And while he’s checking it, what’s the machine doing? Nothing, right? It’s not, it’s not auto fed. It’s not on a bar feeder.
[7:31] This was a hand load, little, little pieces, one end, flip it. And then you, and then, you know, and I was like, hold on. I said, no, I said, look, this is a two minute cycle time.
[7:42] You know, you’ve got enough time to inspect your part while it’s running. He goes, while it’s running, but what if it’s bad? I’m like, look, you’re measuring these. You can see if it starts to get close or too far away from nominal and we can make an adjustment.
[7:58] And, or if you have a bad part, you’re going to catch it. And we’re going to only have one. Like that’s the operational risk that we’re going to take is that we’re willing to sacrifice one part across the course of a couple hours.
[8:14] If it keeps us running constantly. So the first day he ran 60 parts, right. Or whatever it was, it was kind of a shortened the way it was done.
[8:22] But anyway, in the, in the end he got 60 parts and then we started calculate and I was like, okay, well, what do we think we’re going to get now? And we did have some change over time and there was some downtime and inspection, but it was like in his mind, he’s, I asked him, I said, what do you think you should get? Well, as many as I can. I said, nope, let’s talk about how many do you think you should get? And he’s, I was like, he says 90 and I was like, let’s go for 135. And he goes, really? And I was like, yeah, let’s do the math together.
[8:53] So we’re just, you know, it’s just explaining to him, you know, and cause he’s inexperienced. And when we got done that day, I think he finished at 129. So that was close enough to the goal.
[9:05] There were some little hiccups, right. It’s still learning, but that in his mind, 90 would have been a great day. But in my mind, 135 is just kind of the standard, right? You know, cause he went from 60 to 90.
[9:19] Oh man, he killed it another extra 50%. But I’m like, you’re still only halfway of where we need to be. But once we got everything aligned, my instruction was clear, his understanding was clear, we were able to do exactly what we needed to do.
[9:33] And now he has a lesson that he can apply to the next job and the next job or the next job. And it’s part of that training. And that’s a really good practical example, you know, for someone on the shop floor.
[9:45] We can think about how much harder that gets when you then talk about management. How do you teach management those kinds of skills, right? It’s not a measurable machine time output skill. It’s about how do you get a middle level manager, right.
[10:01] Or your shop floor manager to manage your expectations and to be able to see those things. Yes. Because you can’t, you can’t delegate your experience, right.
[10:11] And I know you’re in your shop. How many years now? A long time, right. A long time.
[10:16] Yeah. 27 years. The school of hard knocks, the school of expensive losses, crash machines, right.
[10:22] Yeah. We’ve all been there. Yeah.
[10:24] But whenever you bring in someone new to the business, new to your industry, whether at some kind of management level, they’re still green till a lot of those issues that you’re talking about and sometimes you, whenever you can’t delegate that experience and that mindset, that’s tough. How do you get those people to maintain your standards in your business? Yeah. Well, even in that situation, that was just one item.
[10:51] You got to think across my business, across your business, there are those individual items everywhere. I just happened to be kind of checking in on this one. If I was specifically checking in because I was knowing that the customer is kind of like asking us to speed this up.
[11:08] You know, we gave them a date. We’re fine for the date that we gave them, but it’s not a date they wanted. So if I hadn’t been following up on it, so I think that’s a good mix because that could have gone on for a couple of days if I wasn’t following up or the production manager wasn’t following up or the supervisor wasn’t following up.
[11:25] So I think that kind of leads us into that. So at what point, I mean, how do our standards start slipping? Right. I think that’s a, that’s a really broad question, but I think just to kind of kick that off a little bit, I think the two things for me that are really most important are going to be the ownership and then the monitoring.
[11:47] Right. So we’re going to, we’re going to give ownership of this process or product or standard or something to someone or to some group of someone’s. From that point, I think it’s important that we then monitor that.
[12:01] And those are the two parts that really help make our standards stick. Um, but when we don’t do that, then they’ll start slipping a little bit, right? So. I hear it too often.
[12:13] You, you talk to people about an issue or you find something on the shop floor and they say, well, I mean, I didn’t do that or I didn’t leave it there or, or that’s not my job. Excuses. And I don’t know if you, if you get those, those attitudes or those behaviors, but they’re never acceptable for me, they’re non-negotiable on that.
[12:32] Right. If you see it, you identify it, you raise it, you report it, you correct it. Whether it’s your issue or whether it’s not, you’ve got responsibility when you identify it.
[12:42] And I see that a lot with the likes of housekeeping, 5S, somebody will set something down and it just sits there, right? Someone’s just got a, a, a, a water bottle or, you know, something there and it’s just sat there and it’s like, who left that there? Oh, I don’t know. How long has it been there? I don’t know, a couple of weeks. And you’re just like, but should, can we dispose of it? Well, I don’t know.
[13:06] It’s not mine. I don’t know whose it is, but it’s, but it’s in your area, right? This is the area you’re responsible for. So, own it, set the expectations.
[13:14] You know, I’m glad you said that because when we get done, I am going to the floor because there is something that I have seen for days and maybe even weeks at this point, and I just, I’ve continued to overlook it because I’ve like, oh, I’ve got something that’s more important to do, but I am going to go get that. And we are moving that cart that has that, we had to do some repairs on one of our Swiss machines, right? And there’s a little component part of it that just laying there on the bottom of a cart and I’m like, you know, but every time I’ve seen it, I’ve been like, I need to do that, I need to make sure that’s done, but you know, right. All right, done.
[13:54] Hey, it’s Paul from making chips. If you’ve been burned by recruiters who don’t understand manufacturing, you are not alone. That’s exactly why we created hire MFG leaders.
[14:04] We’re not just recruiters, we’re current and former shop owners, and we know what it takes to lead in this industry, whether you’re hiring your next operations leader, sales manager, or production supervisor, we’ll help you find someone who actually fits, learn more at makingchips.com slash hire. You know, I think in my shop, I don’t so much get the, um, that’s not my job, that’s not my responsibility. It’s like my, it’s like what I always hear is like, right, right.
[14:33] No, yeah. I was just getting ready to do that. Uh, right.
[14:36] Yeah, no, it’s, it’s good. Like it’s always the excuses, but it’s like, they won’t say it’s not my job or whatever, but it’s the same thing, right? Yeah, totally. Totally.
[14:48] Yeah. Cause it’s like, or, you know, if you’re asking like, Hey, where are we at? And we’re almost there. Like, it’s always like, you know, I’ve learned over the years, especially like if you go through audits or you go through trainings, I mean, you go through audits or you go through like customer talks, like I make, try to make it a point to never talk in, well, we usually do this.
[15:08] Normally we do this most of the time. Like it’s, you need to change that thinking to like, this is what we do. This is the standard because if you use those words of, well, normally we do X, Y, Z, it leaves some gray area and it leaves that, gives that individual some freedom to be like, Oh, well this time I didn’t.
[15:32] But like, you know, when you’re dealing with a customer, when you’re dealing with, you know, auditors, An auditor is that you have to do it, it’s a standard process. You must conform to it every time. But that’s a great lesson.
[15:43] That’s a really, really good point. And for the people on the shop floor, this is the way we do it. And here’s why we do it.
[15:50] Yeah. And then there’s, there’s no room for the gray area. This is your expectation.
[15:54] You set your expectation very, very clearly. Yeah. Yeah.
[15:57] That’s really good. So I think that’s, that’s it. You know, it’s, it’s monitoring and it’s ownership and it’s whether it’s your ownership or giving that ownership to somewhere else, but that’s, you know, when we start to get away from those things, ownership and monitoring, that’s when we start to see those standards slip.
[16:12] So that kind of takes us into the cost part of things, right? So, because what happens is once standards start to slip, then that means that we’ve got some costs involved. But a lot of times it’s more hidden costs. You know, it’s probably not like a glaring dollar amount.
[16:28] That’s just like, boom, you’re just like writing checks, but it’s going to be hidden costs, just like the example I gave earlier, that hidden cost was we only got half the production that we needed to get for the day, right? And that means that our customer is paying us X amount of dollars for X amount of parts, and it takes us twice as long to make it well, they’re not going to pay us more, right? That’s on our organization to make that happen. So I think you’ve got some, we’ve got some, some hidden costs that are involved there. Yeah.
[17:01] The question and the mentality that you have to get into your employees is if you are a customer, would you be willing to pay for us to do it this way, right? The length of time it takes, what would you be willing to pay for if it was your business, right? How much would you be willing to pay for that part? So the amount of inspection that goes into it, and you can say like, that’s non-cosmetic, why are we shining lights on it to see if there’s a, you know, a scratch in it or something? I mean, does that matter? Does it not? Are we over-processing? If we can train our teams to the right standard or the right expectations, then it saves a lot of that hidden cost. We, you made me think about our receiving process. Sometimes we have a massive backlog, maybe of parts that we can’t book in because maybe it hasn’t, there’s an issue with the paperwork or maybe there’s a quantity wrong or something, and it just sits there, it just sits there.
[17:51] And then there’s some other guy in the shop saying, we’re waiting for these parts to come in. Where are they? And the guy at the back door says, well, I can’t receive them because there’s an issue there. And well, who’s resolving it, right? And sometimes there seems to be a lack of willingness for some people to reach out and say, Hey, I need help with this.
[18:08] Cause that guy’s waiting it over there. It can be a case of me and my small corner and you’re in yours over there, right? And sometimes we don’t talk, even in the very smallest of businesses, we can seem to be really disconnected, but how do we maintain that connection? How do we stop and maintain that standard to ensure that the business is synchronized, that they know what they’re doing and whenever they need support again, right? It’s if there’s an issue, are they dealing with it today? What’s the speed of the escalation, right? Don’t let the sun go down on an issue. If there’s bad news, I want to hear about it today.
[18:44] Well, and I think that kind of takes me back to another part, like some of the hiring decisions, right? Because at the end of the day, we all know that we’ve got A players, right? We’ve got B players and we’ve got C players. We’ve got the A players are going to notice that and they’re going to take action, right? And then the B players are going to notice it and maybe they’ll take action sometimes, but most of the time they’ll probably just be like, they’ll just kind of scruff it off a little bit. But then the C players, like they’re not even going to notice it, right? And so I think it’s, that’s the other part of it that like how, you know, making sure that we’re putting the right people in place that are going to again, go back to that, take that ownership, take that monitoring part and make sure that, that we’re not settling for the C players and that we’re, you know, working with our B players to, to help build them up so they can become A players, you know? Because otherwise, if we don’t do that, what we’re going to do there, I think that hidden cost there is that cultural drift.
[19:49] We’re going to call it, we’re going to, cultural is going to start drifting lower and lower and lower. And we’ve got to create that again, standard to get us back to the right level so that we’re not continuing on the wrong path, right? If you, if you’ve spent time and you’ve hired and recruited really, really good people, but they come in with higher expectations than you have as the business owner, what happens is, well, they’re going to come down to your expectation. And then you’re losing all the drive and all the good standards and all the efficiencies that they’ve been putting in there.
[20:21] We need to find some way of maintaining our standards and their standards as well. As you said, to encourage and to build up and to train those B and C players. Yeah.
[20:33] And I think, I mean, my philosophy on that is, is like, I I’m okay if you come in and you’re a C player and I’m okay if you come in and you’re a B player. I love it if you come in and you’re an A player, but we don’t all have to be A players today. But what I want to see is I want to see my B’s working to become A’s and my C’s working to become B’s.
[20:52] And when we become stagnant, that’s when the challenges start to show up. Right? Because, uh, and I do think it’s part of the, the organization’s responsibility to help train, to help instill those values, to help set those standards. And that’s, that’s something that I think is smaller machine shops.
[21:10] That’s a real struggle. And that’s something that we’re working on internally. We’ve not always done it perfect, but we want to take people who have a little less experience.
[21:19] We want to take people that don’t have all the understanding and work with them and help teach them so they can grow into becoming a C to a B player and a B to an A player. It’s interesting as well that not everybody’s A, B’s and C’s are in the same skills and there’s a whole lot of versatility. With everybody’s strengths.
[21:38] Right. I, uh, there’s a, there’s a guy and he lives down our road a little bit and he’s a real tinker, right? He could fix anything. He could invent something.
[21:48] He could come up with something, but you go into his shed, you can find nothing. But if you ask him for something, he knows exactly where it is. Right.
[21:55] Yeah. And those people are great to have in your business because they can pull you out of a hole if something breaks, something shuts down. If you need someone to come up with a jig or something or a fixture, those people are the guys that can design and create stuff, but they’re not the kind of people that you want in charge of your 5S and your housekeeping.
[22:12] Right. Yeah, totally. Yeah.
[22:14] So it’s a, it’s about how do you enable and equip those people, keep them engaged, but still give the people whose strengths are in those other things and how can you get the best and put those round holes, round pegs, round holes, square pegs, square holes, and, and keep your business managing at the right level and using those people’s skills appropriately. Yeah. I think that sounds like a, another topic, how we build our team, A, B and C players.
[22:43] And, you know, cause you can have a, I don’t want to get into it now, but you know, you definitely can have an A player as a mechanical side and a, and a C player from a, a drive side and then be the same person, right. But it’s so important. I think that your supervisor’s level is your supervisors and your managers.
[23:01] Those are the people that need to have the control over your standards of your expectations of across all your different projects that you’re doing, your 5S, your output, your quality processes. They’re the guys that need to be monitoring that and maintaining those standards. Yeah.
[23:16] Kind of wrapping that up. I think when we start to see those standards slip, we kind of run into some of the cost, the hidden cost, even something we haven’t really touched on, but obviously there’s the cultural side, but we didn’t really talk about like the customer trust. Like you’ve got the real possibility to, to erode the customer trust because maybe your standards are in your inspection and you’re not inspecting your products like you’re supposed to.
[23:39] And the next thing you know, your customer’s got issues. So again, there’s that customer trust. Then you’re draining the bandwidth of your leadership team.
[23:47] You think about the domino effect, like we didn’t set the standard and hold the standard to inspecting parts like we were supposed to. From there, we end up getting parts to a customer that they find and they don’t like, well, the next thing you know, you’ve got an 8D, you’ve got a corrective action. Now you’re ultimately, yes, you want to fix that.
[24:08] I mean, that’s the goal is to go back and fix that problem, find that root cause, but that’s stretching out your leadership, right? And it’s almost like if you just spent time on the front side of it and done it right, we wouldn’t have had to do the work on the backside of it to try to correct it. And I think that’s a part that gets missing there. Again, a hidden cost.
[24:27] And your customers, I mean, and I know what it’s like, right? We have a big supplier base, but you need a customer that’s reliable. And if you can find that customer that’s delivering repeatedly, the good standard parts you expect. You put more of your eggs in that basket, right? And you’re, you’re depending on them.
[24:45] You’re putting more volume in to drive costs down and so on, which is really good for the supplier. But if that supplier is inconsistent and it’s giving you good parts one week, bad parts next week, it’s very hard. They become independent.
[24:56] That’s right. They’re not dependable and it ends up costing you a lot of money. You lose a lot of trust.
[25:00] And once you gain that bad reputation, it’s hard to win back. Hard, very hard. So yeah, that customer trust erosion, you’ve got the financial impact from the delays, the reworks, lost opportunities because now, you know, I’ve just lost trust, they’re not really wanting to put something else, another project because you’ve had that erosion on that trust, so, but I think kind of wrapping all that up, you know, what we can do to protect that and not have to deal with those costs is making sure that knowing that whatever we tolerate becomes the new standard, right? So if, if, if I tolerate it, then that’s the standard.
[25:34] And that’s where I think as leaders, you have to be very clear in that. If you run a job shop, manage a job shop or spend your day trying to squeeze more output out of the same people, machines and hours, this one’s for you. During IMTS week, the job shops, workshop and networking reception takes place on Tuesday, September 15th.
[25:57] This half day program is built specifically for shop professionals like us. We want practical ideas that they can actually take back to the floor. You’ll hear how other shops are reducing operational costs, improving output, applying AI and shop ready ways and implementing automation where it makes sense, plus you’ll get a detailed industry outlook and the chance to connect with other job shop leaders who are solving the same problems you are.
[26:20] If you’re going to IMTS to find ideas that can move the needle in your shop, don’t just walk the aisles, get in the room, learn more and register at IMTS.com. Why do you think leaders delay? What is it that is, that is inside of us that makes us not set that standard, right? Not go take that extra step. Um, I think there’s a number of things that we deal with, you know, whether we’ve got time, we feel like we don’t have the time, but again, just like we talked about, maybe it takes us a little bit less time now and it’ll take a lot more time later, but, or maybe we’re dealing with like loyalty or we have hope that the people are going to do things different, or maybe we’ve got a fear, you know, there’s, there’s all kinds of emotions involved in why we’re not actually going and changing and creating the standard. So what makes us delay? I don’t know.
[27:12] I think naturally we’re, we can become complacent, right? If we’re all being honest, who at some point doesn’t become complacent, right? If you go out to your own garage at home or walk around your house, who doesn’t become complacent to what you see every day, you become blind to what’s in front of you. Yeah, that can happen for sure. And, and sometimes it’s nice.
[27:35] You get fresh eyes into the business or you go to a new part of the business that you haven’t been to a while. And that’s when you can see how things should change. Yeah.
[27:45] And then as you said, right, sometimes we’re just, we’re so busy, we’re occupied and we’re carrying so much in our mind that we can just then depend on other people to maintain those standards. Yeah. But like you, like you said, as soon as you, as soon as you walk past something, right, that’s the standard that you’re willing to accept that no matter how busy we get, I will say I definitely have my flaws and there are things that I feel like I don’t need, I don’t have time.
[28:11] I think one of the things I struggle with is I don’t have time to fix it. Fully. So I’ve got something else that’s more important.
[28:18] So I’m going to go work on that. And, and I should probably stop. But like you said, the standard, like one of the things that drives me crazy and it, we do a really good job here.
[28:27] I will say that is the floor. The floor is usually very clean, right? We don’t have trash. We don’t have a bunch of chips and shavings laying around for long, obviously at some point in time, but anytime I’m walking on the floor, if I see a piece of trash, I stop and pick it up.
[28:42] And it makes me think like, like, and I expect everybody else to do the same thing, and that’s kind of goes back to what you were saying earlier, you know, like, well, I didn’t put it there, but make it a point. So, okay. Sorry.
[28:52] I got sidetracked there, but set that standard. Right. But another thing that people struggle with, and a lot of people do not like conflict, right? So in a sense of avoiding conflict, it’s like, well, I just won’t say anything, you know, and then it’s just building and building and building, I’m guilty of having that situation before as well.
[29:13] Um, some people though on the opposite hand, some people love conflict, but, um, I think I’m one of those. So we’re on opposite ends of the spectrum, but no, I think having your, your personality, if you are like very, you know, adverse to conflict, then that’s going to be something that’s difficult. And I’m going to challenge you to step out of your comfort zone because most of the time, if what you’re saying is, okay, so I don’t like conflict, but if I have facts and I approach someone and say, here’s what you’re doing that I would like to see different, and it is very factual and I have examples, every single time it is, you’re right, I need to do a better job at that.
[29:59] If you don’t go to them with facts, then it’s becomes a, he said, she said, it becomes debatable, right? And then that’s where you’re really going to struggle. So that’s, I would say one of the big takeaways, if, if conflict is an issue for you, make sure you have documented facts showing or talking about the things that you want to be done differently. So that way it’s not negotiable, right? It is there.
[30:26] Here’s what you’re doing. Here’s what I want. Here’s our standard.
[30:30] Here’s where you’re falling short. So you don’t have to be all conflict, but you’ve had your fair share. There’s lots of people out there in life, right? I’m sure right now, everyone can think of someone in their head, right? With a really, really good example, but there’s just, there’s that one person and no matter how you show them, they’re going to do it just this way.
[30:50] Cause they think it gets them the same output and they just, they prefer doing it this way in this order, right? Whether it could be as simple as carrying something, right? I want you to stack them in fives. You get three of them in a tray. You got 15, carry that tray, you shelve it, right? Yeah.
[31:05] There’s always this person that says, well, I can, I can stack that 15. I can put another tray on top and stack another 15. So whenever I carry it and go with 30 and you’re just like, yeah, but everybody else just carries them in fifteens.
[31:16] And the point of that is because we don’t want them stacked in case they fall. But there’s always these guys who know how to do it better. And the reason they want to do it that way is because it saves them a little bit of time so that they can take the extra time and check their phone or whatever.
[31:29] Yeah. But it’s the standards, right? And that’s life. But if we let this, and you might think that’s insignificant or really, what does it matter? And maybe that’s a bad example, but it’s about standards.
[31:40] If we set the standard and this is how we do something, then we should do it. Because if it’s not important to that, then what makes it important in a different process or what makes it important to a different person? And if that person’s hard to deal with and you let them away with it, well, what does that say about your management to the rest of the staff who observe those behaviors? There, there’s your, there’s a cultural drift right there. There’s your cultural drift.
[32:06] And it’s hard. Every business has got those kind of people, right? That are just, they just want to do it their way. And it might be insignificant, but sometimes people just test it to see what they can get away with.
[32:17] Yeah. Oh, that’s true. Yeah, that’s totally true.
[32:20] And, and, and I think that’s the other part is that, you know, look, if you’re asking people to, to, to hold a standard, like you’re not being a jerk about it. Like, don’t be a jerk about it. I mean, it’s our standards, our standard, right? I mean, like, like being adult, like I, you know, I want to be fair to you, you be fair to me, and this is our standard, you know, other parts of that, you know, sometimes we have loyalty to individuals or maybe sometimes we just kind of hope that they’re going to change things.
[32:49] You know, it’s funny, like, cause I’m sitting here thinking about what you were talking about. Like, I even think back, this is where sports, you know, as a younger person, when you’re, you’re playing sports, a lot of times, like, I think some of those values can really be instilled there, right? Because that coach is like explaining to you, this is why we want to do this. This is the reason why we’re always hustling.
[33:13] This is the reason why, when, when this happens, we do this. I’m like, we train and we drill, right? And because they set the standard for us. I know, like, I think back, like I played baseball for my entire life growing up.
[33:26] And one of the things that like, I knew you didn’t do as soon as you stepped on the field, you didn’t walk anywhere on the field, unless you were the pitcher. The pitcher could walk to the mound. Everybody else ran and that was just, it wasn’t negotiable.
[33:43] And that was probably because I would get a beating if back in those days, you know, there was a little more corporal punishment going on. But yeah, I mean, I would know it, but it’s something that starts really, you know, when you’re young and I think that’s something that we miss these days though, is, you know, making sure that we’re, we’re setting those standards. We’re holding those zones and we’re not delaying as leaders, right? When we see something, stomp and fix it.
[34:11] I’d say one of the things I’m guilty of doing is trying to make everything right. It’s that concept of like, how do you eat an elephant? Like one bite at a time, right? Well, I want to go in and I want to fix the entire problem, everything at once and have everything perfect where I struggle is making sure that I stop myself and say, no, we need some progress. One step, one bit of progress.
[34:35] Let’s make this change, make that the standard. Let’s have that fix done. And then we’ll go to step two and step three and step four and making sure that we go all the way across it because I’ve also, one of the things I’m guilty of is like, okay, I don’t want to do this until we have the whole thing fixed and guess how long it takes to get the whole thing fixed, weeks, months, years, maybe never.
[34:59] And then we get distracted and we go do something else because we didn’t have it perfect. And a lot of times we just need to just don’t delay in getting started, get something started. You made me think there about our quality and our quality output.
[35:15] And quite often we’ll measure our, our, what’s our proven rate, right? What’s our first past yield or whatever metric you’re going to do. And it’s really, really good to establish that what’s your proven rate. And again, this is about maintaining the standards.
[35:28] This is the standard that we know we can achieve every day. And whenever you’re monitoring that standard, if something goes wrong and the standard falls below your proven rate, it’s very easy to identify and you can say, oh, we had a problem, what caused it? Right. And you create in that baseline that you’re monitoring every day.
[35:45] And then as you find an improvement, you’re increasing your proven rate. And then when it dips below it, you’re, you’re attacking those, those dips in your quality performance. And again, it’s, we’re not just talking about behavior of our people.
[35:59] We’re talking about the behaviors of your whole business and creating those metrics and measuring those standards. What’s the standard, what’s the expectation, what’s the expected efficiency of your machine? How many hours should that machine run in the day? Are you hitting those numbers? Is your downtime of your machines where it should be? Where is that your expectation? Is that what your budgeted, your time you plan for? And then having those measurables available so that you can see when you have a problem with the business and that allows you then to problem solve. Imagine machines running throughout the night while you sleep.
[36:38] No overtime, no extra shifts, just pure productivity. That’s the power of Lights Out manufacturing. And on Lights Out, we show you just how to make that a reality.
[36:46] Join us as we break down automation, robotics, and high efficiency machining so you can produce more, work less, and increase your bottom line. Subscribe to Lights Out today and start scaling your shop the smart way. I think this is a perfect transition because we go from where we were delaying, and now we want to step into the tactical side.
[37:08] We want to, we want to look at defining our non-negotiables and making sure that we have correct response times, making sure that we have correct standards, we document exactly what our expectations are, and that gives us, again, going back to what we said, having a standard that everybody knows how they’re supposed to live up to it. And I think one of the tools that we use to help define our processes is our ERP system, right? So we have a software that is there telling our operators exactly what to do. We’re setting that standard.
[37:49] We create work orders. We give them work instructions. We give them programs.
[37:55] We tell them what tools to use. We tell them what, what dimensions to check. We tell them how frequently to check it.
[38:01] That’s setting them up. That is creating their standard. And ultimately our standard is the blueprint, right, from that technical side of things.
[38:09] The blueprint is the technical side. Uh, that is the standard, but we’re giving them the roadmap to get there. And that’s the other thing that we also got to make sure that we’re doing.
[38:18] We don’t just say, Hey, go do this. This is our standard. We also have to give them the map of how to get there.
[38:24] The instructions of how they need to achieve and accomplish that the things that we want to have done, we’ve got to tell them how to get there. So at the end of the day, you know, then that shifts into our monitoring. We’re making sure that we’re accomplishing those.
[38:40] And with our, with our ERP system, we’re able to tell them exactly how many we expect to go. The job that I gave that explanation earlier about, you know, we were only running 60 that first day. That was a brand new job.
[38:53] So we were kind of really still filling. We knew about what we should get in a, in a day, but we were still feeling our way through that. And part of that original setup in that first run is to figure out what should we get.
[39:05] After that first day, now we can adjust our system and we know what our daily output should be for that particular item. So there we’ve created our standard. So I think it just keeps always driving back to making sure that our inputs are going in and our employees and everyone is knowing exactly what the expectations are.
[39:24] That’s right. And if you have, if you have aligned your plan, your standard, you know what you’re building, the, the works there, and then you need to facilitate the environment, how do you know every day that the environment is supporting the planned work? Right. And that comes back to your 5S, your housekeeping, how do you control that every day? It’s good practice in a lot of industries.
[39:47] I don’t know if you guys do it, but we would like photograph, this is what the area should look like, right? And then label it, this is where these things should be. This is what should be here. And you should be able to visually take that and say, are all my tools here? Yes, no, yes.
[40:03] Is everything in good condition? Is the trash disposed? At the end of shift, you should be able to confirm that I’m good. And the point of that is to maintain the right standard for the next day. We’re talking about how do we stop our standards from falling away from things regressing within the businesses.
[40:20] It’s about making sure that we always reset that standard. And if we can do that in the, in a controlled environment and our environment’s always the same, if it’s repeatable, it’s the standard that we expect, then we know that whenever we release a plan, when we go to execute work, we know that we have the environment that supports the work. Right? And that should make then the output of that more work, more repeatable and reliable and predictable.
[40:48] We know what we’re going to get. Yeah. And I want to, I want to touch on there, like from the shop floor side of things with your 5S.
[40:55] I mean, that’s going to be maybe a daily check or a weekly check, right? And I want to, I want to talk maybe more on the administrative side. If you’re, if you’re dealing with, uh, some larger scale items, make sure that if you’re, if you’re creating a set of standard that you say, Oh, well, we’ll check it once a quarter because once a quarter is a lot of time that you’ve got to drift off course. So try to, try to work and break those down into smaller segments.
[41:22] Two to four weeks is to me is probably about the longest that I want to go without following up on something because that you can have a lot of movement in the wrong direction in two to four weeks. Um, and, and I think this kind of touches on, and we we’ve talked about before. Like, you know, if you go three months, in three months, I can’t remember.
[41:44] I can’t, I can’t remember what we were supposed to be doing. Like you’ve gotten so far out of it that, you know, you, you have to almost start over again and figure out what will, I don’t even know what we were doing. So.
[41:57] And I think there’s a certain amount of routine, right? To maintain the standards. It’s about routine. It’s like, it’s like the guys that brush the floor empty in the trash.
[42:08] We do that every day, right? Why do we do it every day? Good housekeeping, but it’s the same as we do our audits. If we’re checking calibration, we may not want to do it every day, but that person should do something every day, even if it’s different, because they know that come four o’clock, it’s time to do their audit, right? What am I auditing today? It might be a different machine. It may be a different part of the business.
[42:31] But there’s routine in doing audits and doing checks may be different. So you may not go on, you may not audit or check that machine until it’s due after a month. But the fact is that every day I’m doing my standard work as a leader and I’ve got my routine slot.
[42:47] So you, you know, and whenever that time in the rotor for that machine comes up again, you know, you’re in the habit of four o’clock, I checked my boot, what am I auditing today and you’re maintaining those standards as frequently as you need to in your business, but it’s creating that standard work to protect that standard environment. Yeah. And that, that really takes us right into preventing future slippage, because that’s going to be one of the most critical parts, right? You’ve spent the time to develop a standard.
[43:17] You spent the time to train individuals on what that standard is. You’ve done your mapping, you’ve done your processing. Now, what are we going to do to make sure that we’re not slipping away from that? Is that going to be, you know, standard KPI dashboards? Are you going to have things that you review weekly with individuals across the business? Is that going to be, you know, looking at quality metrics? You know, what are our defects? What are our customer rejections? What’s our on-time delivery? You know, looking at customer satisfaction surveys, what type of revenue were we able to get out this month? I can’t even begin to imagine.
[43:56] I mean, there’s thousands and thousands of things that we can track from a KPI standpoint. There’s going to be probably five or six that are going to be very easy-ish to do and accomplish if we’ve created the standard, and I think that’s the other part of it. So often we talk about KPIs and we talk about tracking this and metrics that.
[44:14] If we’ve not created standards, if we’ve not created the baseline, you can’t do any of that. That’s just a complete recipe for disaster, and so I think that’s, you know, one of the things that we have to make sure we do is we set the standards and then we have to track it. We have to monitor it to prevent that future slippage.
[44:34] Well, if you don’t have a baseline, you have nothing to audit, right? And then you have no target to improve. How do you know you’re getting better? As a business, how do you know you’re developing? How do you know your people are performing? If you’re not, if you’re not measuring it, and then it’s important to connect that to your whole business. So how does the guys in the shop floor see those metrics? How did they know if they’re performing and hitting their numbers? Quite often we see it that maybe management, supervisors, whatever, they might have a operational meeting, maybe every Friday to go through the numbers for the week or whatever day you do it on, but at some point as well, it’s really good for the whole factory to get feedback.
[45:12] How do they know what their performance is? Did we hit our numbers last week, last month, last quarter? What’s our quality? What’s our, what’s our performance been to our customers and being able to communicate those as well, because quite often we’ve got really good people who want to maintain really good standards, but if they don’t actually see the results, how do they know if they’re hitting the standards? So it’s about that engagement and keeping them involved so that they know where the bar is and where they’re performing in relation to the bar. And that, and that makes managing so much easier. Right.
[45:47] I mean, I can’t even begin, and that kind of touches on what I said earlier. Like if you have data, like there’s no debate, you know, those conversations are easy because it’s very black and white, like, Hey, this is our standard. You’re not meeting it.
[46:00] Right. So A, number one, we’re going to figure out what can we do to help you get to our standard. Right.
[46:07] We want to do a coaching session. We want to work with you, you know, what’s gone on, talk to me a little bit because we don’t want to have to go the opposite direction with that, but sometimes that’s inevitable, but ultimately, yeah, we want to use those standards to measure, say, Hey, look, let’s, let’s get there, right. I like it.
[46:28] So today we took a look at how our standards start slipping, lack of ownership, lack of monitoring. We looked at the hidden costs that we deal with, and those are, you know, that customer trust erosion. We’ve got the cultural drift that happens and leadership bandwidth drain.
[46:46] We’ve got the why leaders delay that can be, you know, just the loyalty or the fears of disrupting things. We’ve got avoiding conflict. Then we took a look at some of the tactical things that we want to use, defining our non-negotiables, making sure that we break things down into short segments, and then finally preventing that future slippage, visible KPIs, weekly reviews, monitoring your quality outputs, your on-time delivery, making sure that the entire team is involved with that.
[47:17] So as we kind of close this out, you know, I want to make sure that we, we, we kind of have one little side conversation about your standards typically aren’t going to all slip at once. They’re going to be eroding quietly. And that is a risk that we have to make sure that we mitigate because we get busy doing other things.
[47:41] Don’t let your standards slip. Make sure that we’re putting those monitors in place. Make sure that we’re having the right people that we can go back, that we can trust to go back and keep those things.
[47:54] Making sure that not, we’re not delaying our decisions because delayed decisions are expensive. Yeah. I was going to add that we, we must make deliberate time to audit the business.
[48:07] Right. We talked in previous episodes about doing our Gemba set deliberate time aside where you can actually go to the place of work and review how the work’s doing, not just be there just to chat to the guys, but actually to look around, use your eyes, be present in the work and understand, is this the standard that I expect the business to run? I really enjoyed this topic. I think my favorite phrase, and I think it was, you said it, I may not quote it the same way, but the standard that you’re willing to walk past is the standard that you accept and you’re doing that every day, whether it’s deliberate or subconscious.
[48:42] Your team will see you. Yeah, people are watching that. Yeah, that’s right.
[48:45] The standard that you walk past is the standard that you accept. And, and it’s important to be aware of that because your team is watching you as a leader. That’s it.
[48:54] And decisive leadership protects your culture. It protects your customer trust and it protects your profitability. So thanks for joining us today on the manufacturing blueprint.
[49:05] You’ve got the blueprint now go build it.
This transcript was auto-generated and may contain errors.